<menuitem id="qawbz"></menuitem>

<tbody id="qawbz"></tbody>

    <track id="qawbz"></track>

    <tbody id="qawbz"></tbody>
    <track id="qawbz"><div id="qawbz"></div></track>
      <tbody id="qawbz"></tbody>
    1. 首頁 關于我們 產品中心 新聞中心 服務項目 合作伙伴 技術資料 聯系我們
      新聞中心 News
      當前位置: 首頁 > 新聞中心 > 最新動態 新聞中心

      Brief Introduction of Hot wire tester灼熱絲試驗儀技術參數英文版

      2016-08-06 18:09:25


      Product Name:  Hot wire tester

      Product Model:  ZRS-2

      Design Standards 

      GB/T5169.10-2006 based test methods of glow-wire and glow-wire flammability test method for the finished product

      The standard can be meet:

      GB4706.1  EC60695  UL746A  IEC829   DIN695  VDE0471

      Brief Introduction :

      we use the heating wire with Specific material(Ni80/Cr20) and specific shape to  high current heated to burn the Sample from the vertical direction test in 30 seconds.  Fire risk of products was determined  by ignition conditions or holding burning time of sample and bedding material . The est result is accurate when test temperature (between 550 and 960 )is reached  after one minute .Also,The pressure of the burning need to be  one newton .Application of the test products include and but not limited to solid insulating material and  other solid combustible materials .  The test data  including  GWIT and GWFI.

      The  environmental requirements  :

      1. Requirements about environmental temperature  : -10℃~30

      2. Relative humidity: 85

      3. Supply voltage and power:220V±10 ,  50HZ  , 500W

      Characteristic :

      1. Temperature of hot wire can be preset from 500to 1000 and the error is 2 .

      2. the burning time can be preset from 0 to 999.9 seconds and the often use time is 30 seconds.

      3.  time relay will be used to record the light-off time and fire out time between0to999.9S+0.1s automatically,in addition ,you can  pause it manually .

      4. Thermocouple :Armoured thermocouple from UK (type K) ,Φ0.5mm

      5. the heating wire:Φ4 mm/ Nickel-chromium wire

      the heating wire of Hot wire tester

      The above photo :the heating wire

      6. The depth of the burning:7mm±0.5mm

      7. Travel speed of sample:14mm/s

      8. Using red line photoelectric stop switch, the limit is more accurate

      9. SCR control thermostat system make temperature control more accurate

      10. Time and temperature are digital display,both Observe and record  are very convenient

      11. The burning body is more than 0.5m3and it has a black  background ,the background illumination must be 20Lux or less 。Moreover, we also have 0.75m3 burning body if it is  in need .

      12. The whole test process is automatically controlled and the ventilation system is independent

      13. Dimensions: Width 1160mm × depth 600mm × height 1310mm (including foot)


      版權所有?南京炯雷儀器設備有限公司蘇ICP備12078555號-1 技術支持:玖佰網
      氧指數測定儀 / 建材可燃性試驗儀 /建材不燃性試驗爐 / 建材煙密度測試儀/絕熱用巖棉熱荷重試驗裝置 / 鋼結構防火涂料小樣試驗爐 / 大板法防火涂料測定儀/ 電工套管阻燃性能測試儀 /
      LDQ-2型漏電起痕測試儀 / ZRS-2型灼熱絲試驗儀 / ZY-2型針焰試驗機 / CZF-5水平垂直燃燒儀 / 汽車內飾燃燒試驗儀 / 電線電纜垂直燃燒燃燒儀 /
      地址:南京市江寧區科苑路128號興民工業園 電話:025-87197202
      <menuitem id="qawbz"></menuitem>

      <tbody id="qawbz"></tbody>

        <track id="qawbz"></track>

        <tbody id="qawbz"></tbody>
        <track id="qawbz"><div id="qawbz"></div></track>
          <tbody id="qawbz"></tbody>